REVMODE
ECLIPSE EU | Digital Car Emblem
or 4 interest-free payments of $42.49 with Shop Pay · Free worldwide shipping
A smart plate cover that goes fully dark on command — and clear again just as fast. Electrochromic film, wireless remote, 10-minute install.
Your vehicle & plate
Need help with installation? Go to Installation Guide →
On command
Fully dark.
In 0.01ms.
Electrochromic film — the same tech behind luxury privacy glass. Opaque when you want it, 83% clear when you don't. Silent, instant, remote-controlled from up to 50 metres.
At a glance
Small badge. Serious hardware.
Not a sticker. A screen.
Electrochromic film — instant, silent, no moving parts.
0.1ms
0.01ms switching
IP69
IP65 sealed
<15mm
Rain, snow, dust and heat rated for daily conditions.
0+ nit
50m remote range
12V
Plug into the 12V socket or hardwire — your call.
0Hz
83% clear when off
OTA
10-minute install
Install
Ten minutes.
Plug and play.
Bracket + plate
Mount the bracket
Slide your existing plate into the ECLIPSE bracket and fasten it to your factory plate mounts with the included screws.
Cable routing
Route the cable
Run the cable along your existing plate-light wiring into the cabin or trunk. A 4m extension is included for longer runs.
12V + remote pairing
Power & pair
Plug into the 12V socket — or hardwire it. Mount the LED indicator, pair the remote, and you're done.
LED indicator included — mount it inside the car so you always know the state at a glance.
Tech specs
Full numbers.
| Display | High-density IPS |
| Refresh | 60Hz · 60fps real-time |
| Response | 0.1 ms |
| Brightness | 1000+ nits · auto-dim |
| Glass | AR-bonded |
| Sealing | IP69 |
| Body | CNC aluminum unibody |
| Profile | <15 mm flush |
| Power | 12V · USB-C → fuse box |
| Updates | OTA |
Questions.
Will it fit my car?
ECLIPSE comes in two sizes: NA (12" × 6") for US and Canadian plates, and EU (520 × 110mm) for the long European standard. Your plate must be flat and under 2mm thick to seat in the bracket — measure before ordering if your country uses a shorter format.
How does installation work?
Pry the factory badge off (warm it, floss the adhesive, plastic trim tool). Behind it are two factory pin holes — on virtually every BMW. Antenna wire through one, power wires through the other, then plug into your trunk 12V socket or connect the direct wires to the fuse box. Some of the newest models lack the pin holes — a small thin hole can be drilled and HALO covers it completely. Under 30 minutes, fully reversible. Full walkthrough on the Installation Guide.
How is HALO powered?
About 10 minutes. Mount the bracket, route the cable, plug into your 12V socket or hardwire it. No cutting and no permanent modification — fully reversible.
Can I upload my own content?
Electrochromic film, the same technology used in luxury privacy glass. One tap of the remote switches it fully opaque or back to 83% clear in 0.01ms — silent, with no moving parts.
When do pre-orders ship?
In stock and shipped the next business day, with free worldwide shipping.
Is it road legal?
Yes — IP65 rated against rain, snow, dust and heat, with a high-impact housing built for daily conditions.
Warranty and returns?
ECLIPSE is built for private property, show cars, exhibitions, photography and track use. Visibility-altering accessories are regulated in many regions — check your local laws before use.